LC UPC LC UPC MM 3.0 DX LSXH PVC 2M Fiber Optic Patch Cables
A fiber pigtail is a single,short,usually tight-buffered,optical fiber that has an optical connector pre-installed on one end and a length of exposed fiber at the other end.
The end of the pigtail is stripped and fusion spliced to a single fiber of a multi-fiber trunk. Splicing of pigtails to each fiber in the trunk "breaks out" the multi-fiber cable into its component fibers for connection to the end equipment.
Pigtails can have female or male connectors. Female connectors could be mounted in a patch panel, often in pairs although single-fiber solutions exist, to allow them to be connected to endpoints or other fiber runs with patch fibers. Alternatively they can have male connectors and plug directly into an optical transceiver.
High Quality and Cost-effective 9/125μm
SM Breakout fiber Pigtail
12 fibers/colored pigtail
It’s consists of 12pcs of Simplex pigtail.12pcs is a unit.Meets Telcordia GR-326 Core and ROHS requirements.
The connector could be SC, FC, LC, ST, MU, and E2000etc.
The cable could be G652D, G655, G657, OM1, OM2, OM3, OM4 etc.
The cable size could be 0.25, 0.9,
There are 12 colors for your option.
Both 250um and 900um is same colored, easy to identify and make right splice.
Tight buffer, semi-tight buffer. Loose buffer are available
Pigtails are used for splice applications when terminating outside plant cable. It’s consists of a connector and a special length
Items | Parameters |
Fiber Mode
|
9/125μm
|
Connector Type1
|
SC/APC
|
Connector Type2
|
Unterminated
|
Fiber Mode
|
SM
|
Breakout length
|
0.5m
|
Wavelength
|
1310/1550nm
|
Jacket Material
|
PVC/LSZH
|
Insertion loss
|
≤0.3dB
|
Interchangeability
|
≤0.2dB
|
Return loss
|
≥50dB
|
Vibration
|
≤0.2dB
|
Operating temperature
|
-40~75°C
|
Storage temperature
|
-45~85°C
|
Geometric Specification (only for 3D interferometer tested)
|